The Dvxca type 1kv unipolar aluminum conductor cross-linked polyethylene (XLPE) underground electrical power cable, with specifications ranging from 1X50mm to 1X240mm and a rated current of 16A, is specially designed for underground low-voltage power transmission and suitable for various low-voltage power consumption scenarios.​ The conductor is made of high-purity aluminum. The unipolar structure design makes cable laying more flexible. The aluminum conductor has been treated with special processes to improve conductivity and corrosion resistance, enabling it to operate stably for a long time in humid underground environments. The XLPE insulation layer has a wide temperature resistance range (-40℃ to 90℃) and high insulation resistance, which can resist underground water vapor and chemical erosion, ensuring the safety of power transmission.​ This cable is applicable to scenarios such as low-voltage power distribution in residential communities, power supply for small factory equipment, and municipal street lamp lines. Its compact structure, with an outer diameter varying from 10mm to 25mm according to specifications, has good bending performance, making it easy to lay in narrow underground spaces. The overall design takes both economy and reliability into account, providing a stable solution for low-voltage underground power transmission.

The NYY unipolar cable is a type of power cable suitable for low-voltage distribution systems, with a designed voltage level of 0.6/1 Kv. It is widely used in power transmission scenarios in industrial, commercial, and civil buildings. This cable adopts a unipolar structure, meaning each cable contains only one conductive core, with cross-sectional areas of 120mm², 150mm², and 185mm² respectively, allowing flexible selection based on different current-carrying capacity requirements. In terms of structure, the core of the NYY unipolar cable is a high-purity copper or aluminum conductor, which has excellent electrical conductivity and can effectively reduce energy loss during power transmission. The conductor is wrapped with a polyvinyl chloride (PVC) insulation layer. PVC material has good insulation, corrosion resistance, and mechanical strength, which can effectively protect the conductor from the external environment and ensure the safe operation of the cable. Outside the insulation layer, there is a PVC sheath, which further enhances the cable's protective capability, enabling it to adapt to various complex environments, such as humid and dusty places, and even withstand mechanical collisions and squeeze to a certain extent. In terms of performance, the voltage level of this cable is 0.6/1 Kv, which means its rated power frequency voltage is 0.6 Kv and the maximum working voltage is 1 Kv. It is suitable for power transmission in low-voltage distribution systems and can be used to connect electrical equipment such as transformers, distribution cabinets, and motors. Cables with different cross-sectional areas correspond to different current-carrying capacities. The 120mm², 150mm², and 185mm² cables can carry different magnitudes of current respectively. Users can select the appropriate specification according to the actual electrical load to ensure the safe and efficient operation of the cable. In addition, the cable also has good heat resistance and can work stably within a certain temperature range. Generally, its long-term allowable operating temperature does not exceed 70℃, and the maximum temperature during a short circuit does not exceed 160℃ (with a duration not exceeding 5 seconds). In terms of installation and use, the NYY unipolar cable can be installed in various ways such as open laying, concealed laying, and pipe threading. During installation, excessive bending and stretching should be avoided to prevent damage to the cable's insulation layer and sheath. At the same time, the cable laying environment should be away from dangerous factors such as high temperature, open flame, and chemical corrosion to extend the service life of the cable. When connecting, appropriate joints and terminals should be used to ensure firm connection and reliable insulation, avoiding faults such as leakage and short circuit. In general, the NYY unipolar cable (0.6/1 Kv, PVC insulation and sheath, 120mm², 150mm², 185mm²) has become an ideal power transmission cable in low-voltage distribution systems due to its excellent performance, reliable protection, and flexible application. It can meet the power demand in different scenarios and provide a strong guarantee for the safe and stable operation of the power system.