CU/PVC H07V-R

Category：

Building wire
Share：
QR code:
Release time：

2025-02-19 02:20:18

Instant inquiry

Product Introduction

CU/PVC H07V-R cable features a plain annealed strand conductor class 2 with PVC Insulation. It is also known as Building Wire or Electric Wire. H07V-R cables have normal size of 1-400 mm².

We supply these cables following the IEC60227, BS EN 50525-2-31 with voltage 450/750v. For Australia and New Zealand standard AS/NZS 5000.1 These building wire have different rated voltage. They are 0.6/1kv rather than 450V/750V.

CU/PVC H07V-R Cable Parameter

AWG	No. of Cores x Nominal Cross-Sectional Area	Nominal Thickness of Insulation	Nominal Overall Diameter	Nominal Copper Weight	Nominal Weight
	# x mm²	mm	mm	kg/km	kg/km
H07V-R
16(7/24)	1 x 1.5	0.7	3	14.4	23
14(7/22)	1 x 2.5	0.8	3.6	24	35
12(7/20)	1 x 4	0.8	4.2	39	51
10(7/18)	1 x 6	0.8	4.7	58	71
8(7/16)	1 x 10	1	6.1	96	120
6(7/14)	1 x 16	1	7.2	154	170
4(7/12)	1 x 25	1.2	8.4	240	260
2(7/10)	1 x 35	1.2	9.5	336	350
1(19/13)	1 x 50	1.4	11.3	480	480
2/0(19/11)	1 x 70	1,4	12.6	672	680
3/0(19/10)	1 x 95	1,6	14.7	912	930
4/0(37/12)	1 x 120	1,6	16.2	1152	1160
300MCM(37/11)	1 x 150	1,8	18.1	1440	1430
350MCM(37/10)	1 x 185	2,0	20.2	1776	1780
500MCM(61/11)	1 x 240	2,2	22.9	2304	2360
	1 x 300	2.4	24.5		2940
	1 x 400	2.6	27.5		3740

Description Of CU/PVC H07V-R

Conductor: annealed strand copper class 2

Rated voltage: 450/750v

Insulation: PVC

Bending radius: 15 times of overall diameter

Standard: BS EN50525-2-31, IEC 60227. AS/NZS 5000.1

Short circuit temp: +160 ℃

Flame retardant: IEC60332-1

Insulation resistance: 10 MΩ x km

Application Of CU/PVC H07V-R

H07V-U is designed for the application to the inside of equipment or protective laying to the lightings.it is normally installed in tubes conduit under and surface mounting of plasters indoor in dry situations. It is a good choice for production facilities, inner wiring of equipment, switch and distributor boards or were a thicker strand of multi-wire is required.